收藏本站
IP series
Pushbutton switches for harsh environments - bushing ? 12 mm - momentary
Distinctive features and specifications
UG1212-A-R1
K Illuminated or non-illuminated
K Tactile feedback
K Wide variety of configurations
K Flat round actuator for optional marking
K Sealed to IP67
B1
5A 28VDC, 70.000 cycles
0,2A 48VDC, 500.000 cycles
0,5A 48VAC, 500.000 cycles
ENVIRONMENTAL SPECIFICATIONS
? Front panel sealing : IP67 according to IEC 60529
IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
? Shock resistance : 100 g according to IEC 512-4, test 6c
? Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
? Salt spray : IEC 512-6, test 11f
? Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
? Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
? Max. current/voltage rating with resistive load (gold plated silver contacts):
For W terminals, current has to
be limited to 400mA.
? Initial contact resistance : 100 m ? max.
? Insulation resistance : 1 G ? min. at 500VDC
? Dielectric strength : 1.500 Vrms
? Contact bounce : 10 ms
LED COMPONENT SPECIFICATIONS
LED colour Forward current Typ. forward voltage Max. forward voltage
Super red (L0S) 20mA 2,1V 2,3V
Yellow (L0Y) 20mA 2,1V 2,3V
Green (L0G) 20mA 2,1V 2,3V
Blue (L0B) 20mA 3,2V 3,8V
GENERAL SPECIFICATIONS
? Panel thickness : 1,5 mm (.059) min.
4 mm (.157 max.)
? Total travel :
Funct. 3 : 1,7 mm (.067) +/- 0,3 mm
Funct. 5 : 1,3 mm (.051) +/- 0,3 mm
? Typical operating force : 6N +/- 2N
? Low level/mech. life : 1.000.000 cycles
? Torque : 1,5 Nm max. applied to nut
? Soldering : 320°C max. for 3 sec.
MATERIALS
? Case : thermoplastic UL94-V0
? Actuator : polyamide 6/6
? Bushing/bezel : zinc die-cast
(zamac), black painted
? Contacts : silver, gold plated (std)
brass, gold plated (for option 104)
? Output wires (flying lead terminals) :
F version : AWG20, section 0,6 mm 2
W version : AWG24, section 0,23 mm 2
? LED wires :
F version : AWG26, section 0,12 mm 2
W version : AWG24, section 0,23 mm 2
? Lens : polycarbonate
? Terminal seal : epoxy
White (L0W) 20mA 3,35V
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
4,25V
AGENCY APPROVAL
2A 125VAC/250VAC
File E83438
Se e following pages.
MOUNTING
Panel cut-out
Matrix mounting
Back of panel space requirement
(.507)
(.787)
(.787)
(.535DIA)
(.531DIA)
12.90
?13.60
? O-ring
1
?13.50
20.00
20.00
APEM
www.apem.com
CIPCE1
B1-15
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
IPR1SAD2L0G SWITCH PUSHBUTTON SPST 2A 125V
IPS-3901 BOX ALUM 3.79X3.79X1.77 NAT
IPS-3903 BOX ALUM 3.79X3.79X2.64 NAT
IPS-3905 BOX ALUM 7.56X3.78X1.77 NAT
IPS-3907 BOX ALUM 7.56X3.78X2.64 NAT
IPS-3909 BOX ALUM 10.79X6.81X2.60 NAT
IPS-3911 BOX ALUM 10.79X6.81X3.94 NAT
IPS-3913 BOX ALUM 5.91X3.94X1.97 NAT
相关代理商/技术参数
IPC3SAD7/1LOS 制造商:Apem Components 功能描述:Bulk
IPC3SAD9 功能描述:按钮开关 SEALED OFF-(ON) ORN RoHS:否 制造商:C&K Components 触点形式:2 NC - 2 NO 开关功能:ON ? OFF 电流额定值:4 A 电压额定值 AC:12 V to 250 V 电压额定值 DC:12 V to 50 V 功率额定值: 安装风格:Through Hole 照明:Illuminated 照明颜色:None IP 等级:IP 40 端接类型:Solder 触点电镀:Silver 执行器:Square 盖颜色: 封装: 可燃性等级:UL 94 V-0
IPC4111 制造商:Thomas & Betts 功能描述:INSUL PIERC CONNECTOR 制造商:Thomas & Betts 功能描述:Cable Accessories Piercing Connector
IPC4141 制造商:Thomas & Betts 功能描述:INSUL PIERC CONNECTOR 制造商:Thomas & Betts 功能描述:Cable Accessories Piercing Connector
IPC500-250-2 制造商:Panduit Corp 功能描述:INSULATION - PIERCING CONNECTOR IPC500-250-2 制造商:Panduit Corp 功能描述:INSULATION - PIERCING CONN IPC500-250-2 - Bulk 制造商:Panduit Corp 功能描述:Cable Accessories Insulation Piercing Connector Nylon
IPC5041 制造商:Thomas & Betts 功能描述:INSUL PIERC CONNECTOR 制造商:Thomas & Betts 功能描述:Cable Accessories Piercing Connector
IPC50R045CP 功能描述:MOSFET COOLM RoHS:否 制造商:STMicroelectronics 晶体管极性:N-Channel 汲极/源极击穿电压:650 V 闸/源击穿电压:25 V 漏极连续电流:130 A 电阻汲极/源极 RDS（导通）:0.014 Ohms 配置:Single 最大工作温度: 安装风格:Through Hole 封装 / 箱体:Max247 封装:Tube
IPC50R045CPX1SA1 制造商:Infineon Technologies AG 功能描述:S 制造商:Infineon Technologies AG 功能描述:COOL MOS - Gel-pak, waffle pack, wafer, diced wafer on film